12/9/2023 0 Comments Trex step lightsDepending on the type of lights you have, this may require special connectors or plugs. It’s also a good idea to use extra insulation or waterproofing tape on connections for added protection.įinally, you need to connect all the string lights together so they’re powered by one source. You may also need to use additional materials such as zip ties or cable clips if you’ve hung the lights in an unconventional way. A drill can also be used for extra security if necessary. If you’ve used nails or screws, double-check that they are secure and won’t come loose when exposed to wind or rain. You may need to adjust the position of the lights or make sure that they’re securely attached. If you find any issues, now is the time to fix them. This is also a good time to make sure that the lights are evenly spaced and that there aren’t any gaps. Once the string lights are in place, switch them on to make sure that they’re working properly. It’s also a good idea to attach the lights at equal intervals for an even spread of light. It’s important to make sure that the lights are securely attached so they don’t come undone in windy weather. You can also use hooks to hang them from overhangs or eaves. If you’ve chosen a railing or post, use nails or screws to secure them in place. Now it’s time to attach the string lights. But whatever you do, make sure the lights are secure. You may also need to get creative with how you hang the lights if there’s no railing or post that can be used. Ideally, there should also be some sort of railing or post to attach the string lights onto. You should look for a secure spot that won’t be in danger of being knocked off or damaged by wind or rain. Now you need to decide where you want to hang the string lights. Step 4: Determine Where You’ll Hang the Lights It’s also a good idea to leave some slack in the lights for flexibility. This is also a good time to install any extra lights that you’ve purchased as spares. If there are any that don’t work, check the connections for any loose wires or damaged parts before continuing. Once you have your lights, take them out of the box and make sure that all the bulbs are working. Step 3: Unbox and Prepare the String Lights It’s also a good idea to buy extra string lights just in case. But even if your lights are rated for outdoor use, it’s still important to unplug them in bad weather or when not in use. Be sure to check that your lights are suitable for outdoor use so they don’t get damaged by rain or wind. I bought those elsewhere.Once you know the size of the area, purchase the right number of strings of lights for your Trex deck. For some reason, Home Depot only sells the lights and not the hubs, extensions, transformer, couplers, etc. Note: These lights do no come with the blue 'pig tail' connectors in the picture, the wires plug into a hub or other wires for easy installation. I did not use a staple gun to secure the wiring to the frame, it just seemed to risky to me. I used the light transformer and plugged it into the basement, into an outlet I wired off the outside backyard lights so the riser lights come on when the switch for the outdoor lights is turned on. I recommend plugging all the lights into the hub prior to mounting the hub. One thing I learned was to carefully plug the lights into the hubs as its pretty easy to bend one of the male wire prods. Each light has a short 6 inch wire coming out of it but each also comes with a longer 4' or so long extension wire. To install, I found the center of each step, drilled a 1" hole and ran the wires to a hub (sold separately). I installed them on both stairwells of my deck during construction and they provide safe lighting and add a real wow-factor in style. These are awesome and easy-to-install lights for deck stairs.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |